info@cantusafety.com
4739 S. Jackson Rd., Edinburg, TX 78539
⚡ Same-Day Cards Issued 📞 (956) 887-0094
🛡️ ANSI A92.22 / A92.24 Certified

MEWP Boom Lift & Scissor Lift Operator Certification

Comprehensive operator safety certification for Mobile Elevating Work Platforms (MEWPs), including Group A Type 3 (Scissor Lifts) and Group B Type 3 (Boom Lifts). Meets updated ANSI standards.

Duration ⏱️ 4-6 Hours
Validity 📜 3 Years
Credential 🆔 MEWP Operator License Card
Compliance Standard ⚖️ ANSI/SAIA A92.22 / A92.24 & OSHA 1926.453

📖 Course Executive Summary

Comprehensive operator safety certification for Mobile Elevating Work Platforms (MEWPs), including Group A Type 3 (Scissor Lifts) and Group B Type 3 (Boom Lifts). Meets updated ANSI standards.

👥 Who Should Attend & Prerequisites

Target Audience: Electrical contractors, painters, steel erectors, building maintenance technicians, HVAC installers, and general construction personnel.

Prerequisites & Requirements: Must be 18 years old.

📘 Comprehensive Curriculum & Modules

This course delivers structured classroom instruction and practical skill building covering the following key learning objectives:

Updated ANSI A92 Standards & Operator / Supervisor Roles
Pre-Start Inspection & Worksite Hazard Assessment (Powerlines, Holes, Slopes)
Fall Protection Requirements: Full Body Harness & Lanyard Attachment to Designated Anchor Points
Emergency Recovery Controls & Ground Control Operation
Platform Capacity Limits, Wind Speed Restrictions, & Outrigger Setup
Hands-On Practical Operation & Obstacle Maneuver Test

🔬 Evaluation & Regulatory Standards

Testing & Assessment: Written exam (80%+ passing score) and practical hands-on operating test.

Governing Standards: Aligned with ANSI/SAIA A92.22 / A92.24 & OSHA 1926.453 to ensure 100% employer operator acceptance.

⚡ Instant Class & Group Quote

Enroll in MEWP Boom Lift & Scissor Lift Operator Certification or schedule onsite yard training.

📞 Call Direct: (956) 887-0094